Eşyalarını Tamir Et Topluluk Mağaza

Shark Rotator Slim-Light Lift-Away Upright Roller Brush Replacement

Giriş

When the roller brush is not spinning because of blockage or damage, you might want to consider replacing it.

Neye ihtiyacın var

  1. Shark Rotator Slim-Light Lift-Away Upright Roller Brush Replacement, Roller Brush: adım 1, 2 resimden 1. Shark Rotator Slim-Light Lift-Away Upright Roller Brush Replacement, Roller Brush: adım 1, 2 resimden 2.

    • Push the red Lift Away button down and lift up on the vacuum handle to detach the base.

    • The handle was removed for convenience but is not required.

    Düzenle

  2. Shark Rotator Slim-Light Lift-Away Upright Roller Brush Replacement: adım 2, 1 resimden 1.

    • Turn over the vacuum to reveal the roller brush.

    Düzenle

  3. Shark Rotator Slim-Light Lift-Away Upright Roller Brush Replacement: adım 3, 2 resimden 1. Shark Rotator Slim-Light Lift-Away Upright Roller Brush Replacement: adım 3, 2 resimden 2.

    • Pry the small wheels at the bottom of the base using the plastic opening tool.

    Düzenle

  4. Shark Rotator Slim-Light Lift-Away Upright Roller Brush Replacement: adım 4, 2 resimden 1. Shark Rotator Slim-Light Lift-Away Upright Roller Brush Replacement: adım 4, 2 resimden 2.

    • Using a coin, turn the big white knobs located above the roller brush counter-clockwise.

    Düzenle

  6. Shark Rotator Slim-Light Lift-Away Upright Roller Brush Replacement: adım 5, 3 resimden 1. Shark Rotator Slim-Light Lift-Away Upright Roller Brush Replacement: adım 5, 3 resimden 2. Shark Rotator Slim-Light Lift-Away Upright Roller Brush Replacement: adım 5, 3 resimden 3.

    • Lift up the suction hose to reveal a screw.

    • Remove the 12.7 mm Phillips #02 screw.

    Düzenle

  7. Shark Rotator Slim-Light Lift-Away Upright Roller Brush Replacement: adım 6, 2 resimden 1. Shark Rotator Slim-Light Lift-Away Upright Roller Brush Replacement: adım 6, 2 resimden 2.

    • Remove eight 12.7mm screws located under the vacuum using a Phillips #02 screwdriver.

    • Remove two 12.7 mm screws located next to the wheels with a Phillips #02 screwdriver.

    • The two screws located next to the wheels are smaller in diameter.

    Düzenle

  8. Shark Rotator Slim-Light Lift-Away Upright Roller Brush Replacement: adım 7, 3 resimden 1. Shark Rotator Slim-Light Lift-Away Upright Roller Brush Replacement: adım 7, 3 resimden 2. Shark Rotator Slim-Light Lift-Away Upright Roller Brush Replacement: adım 7, 3 resimden 3.

    • Turn the vacuum upright and pull the white upper section of the brush roller circuit housing.

    • Be careful when lifting the housing as there is a connector attached.

    Düzenle

  9. Shark Rotator Slim-Light Lift-Away Upright Roller Brush Replacement: adım 8, 2 resimden 1. Shark Rotator Slim-Light Lift-Away Upright Roller Brush Replacement: adım 8, 2 resimden 2.

    • Remove the connector attached to the circuit boards using a plastic opening tool.

    Düzenle

  10. Shark Rotator Slim-Light Lift-Away Upright Roller Brush Replacement: adım 9, 3 resimden 1. Shark Rotator Slim-Light Lift-Away Upright Roller Brush Replacement: adım 9, 3 resimden 2. Shark Rotator Slim-Light Lift-Away Upright Roller Brush Replacement: adım 9, 3 resimden 3.

    • Remove the two 12.7 mm screws located at the top of the clear plastic brush roller housing using a Phillips #02 screwdriver.

    • Lift the clear plastic brush roller housing.

    Düzenle

  11. Shark Rotator Slim-Light Lift-Away Upright Roller Brush Replacement: adım 10, 2 resimden 1. Shark Rotator Slim-Light Lift-Away Upright Roller Brush Replacement: adım 10, 2 resimden 2.

    • Wiggle the brush roller upwards from the left and right side slots.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

3 tane daha katılımcı ile

Daniel Ceja

Üyelik tarihi: 01/24/19

277 İtibar

2 adet Kılavuz yazıldı

Rozetler: 6

+3 tane daha rozet

Ekip

Cal Poly, Team S19-G3, White Winter 2019 Cal Poly, Team S19-G3, White Winter 2019 üyesi

CPSU-WHITE-W19S19G3

5 Üyeler

12 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 11

Her zaman: 957