Eşyalarını Tamir Et Topluluk Mağaza

Sharp Aquos Serie mini SHV31 Speaker Replacement

Giriş

This part may need to be replaced if the speaker has been physically damaged or if it was exposed to water. When removing the speaker, be careful not to damage the nearby contacts as these are crucial to how the speaker amplifies sound.

Neye ihtiyacın var

  1. Sharp Aquos Serie mini SHV31 Speaker Replacement, Back Cover: adım 1, 1 resimden 1.

    • Begin by using a nylon spudger to pry off the back.

    Düzenle

  2. Sharp Aquos Serie mini SHV31 Speaker Replacement: adım 2, 2 resimden 1. Sharp Aquos Serie mini SHV31 Speaker Replacement: adım 2, 2 resimden 2.

    • Remove case around battery using a T5 screwdriver to remove four 5mm silver screws.

    • Remove two 6mm T5 black screws.

    Düzenle

  4. Sharp Aquos Serie mini SHV31 Speaker Replacement: adım 3, 1 resimden 1.

    • Use the tweezers to remove the pink clips on either side of the device and then take the casing off.

    Düzenle

  5. Sharp Aquos Serie mini SHV31 Speaker Replacement, Speaker: adım 4, 2 resimden 1. Sharp Aquos Serie mini SHV31 Speaker Replacement, Speaker: adım 4, 2 resimden 2.

    • On the back cover of battery casing, remove the speaker using the tweezers.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

3 tane daha katılımcı ile

Allison Leal

Üyelik tarihi: 10/24/18

387 İtibar

4 adet Kılavuz yazıldı

Rozetler: 5

+2 tane daha rozet

Ekip

UMass Dartmouth, Team S3-G1, Peak Fall 2018 UMass Dartmouth, Team S3-G1, Peak Fall 2018 üyesi

UMASSD-PEAK-F18S3G1

3 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 1

Her zaman: 136