Ana içeriğe geç

Giriş

I am not responsible for anything in this article.

  1. Remove - Back,microSD,battery,sim Remove black rubber screw covers on back of display. Remove 000 phillips screws (4) from top of display.
    • Remove - Back,microSD,battery,sim

    • Remove black rubber screw covers on back of display.

    • Remove 000 phillips screws (4) from top of display.

  2. Remove 3 small silver screws from battery area. Remove 2 Torx t-7's by MicroSD slot.
    • Remove 3 small silver screws from battery area.

    • Remove 2 Torx t-7's by MicroSD slot.

    • After screws are removed you can detach screen.

  3. MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now

    MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now
  4. Remove 4 additional 000 phillips screws from display. Using some heat,spudger,frce pry away the broken display from the frame. Use extreme caution the actual display is very fragile.
    • Remove 4 additional 000 phillips screws from display.

    • Using some heat,spudger,frce pry away the broken display from the frame.

    • Use extreme caution the actual display is very fragile.

  5. Remove connector for digitizer replace connector with new digitizer and rebuild. replace connector with new digitizer and rebuild.
    • Remove connector for digitizer

    • replace connector with new digitizer and rebuild.

  6. Reconnect to main motherboard. Reconnect to main motherboard. Reconnect to main motherboard.
    • Reconnect to main motherboard.

  7. reassemble. Enjoy the new display Enjoy the new display
    • reassemble.

    • Enjoy the new display

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

jckoniecki

Üyelik tarihi: 08-11-2010

51 İtibar

1 Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 3,246