Eşyalarını Tamir Et Topluluk Mağaza

Shower Handle O-ring Replacement

Giriş

If you have a shower head with a constant drip, follow this simple and easy guide to replace the rubber o-ring in your shower handle. Replacing the O-ring can help prevent hard water build up, rusting, and wasting water.

Neye ihtiyacın var

  1. Shower Handle O-ring Replacement, Shower Handle O-ring: adım 1, 1 resimden 1.

    • Be sure your water main is turned off, preventing water flow to your shower.

    • Using your flat head screwdriver, remove the screw from the middle of the handle.

    Düzenle

  2. Shower Handle O-ring Replacement: adım 2, 1 resimden 1.

    • Use your groove joint pliers to loosen and remove the escutcheon plate.

    Düzenle

  4. Shower Handle O-ring Replacement: adım 3, 1 resimden 1.

    • Using your groove joint pliers, loosen and remove the cartridge stem.

    Düzenle

  5. Shower Handle O-ring Replacement: adım 4, 1 resimden 1.

    • Slowly unscrew and remove the stem completely.

    • There may be some water leakage due to built up pressure.

    Düzenle

  6. Shower Handle O-ring Replacement: adım 5, 2 resimden 1. Shower Handle O-ring Replacement: adım 5, 2 resimden 2.

    • Using your flat head screwdriver, remove the screw from the end of the stem cartridge.

    • Once the screw is removed, replace the damaged O-ring with the new replacement O-ring.

    • When installing a new O-ring, be sure the O-ring has a tight seal to prevent further leaking.

    • Once reassembly is complete and all parts are snug, turn the water main back on to allow water to flow to the shower again.

    Düzenle
Bitiş Çizgisi

3 farklı kişi bu kılavuzu tamamladı.

Yazar

2 tane daha katılımcı ile

Cori Fitzpatrick

Üyelik tarihi: 03/20/16

213 İtibar

1 Kılavuz yazıldı

Rozetler: 6

+3 tane daha rozet

Ekip

Michigan Tech, Team 1-6, Lauer Spring 2016 Michigan Tech, Team 1-6, Lauer Spring 2016 üyesi

MTU-LAUER-S16S1G6

1 Üye

1 Kılavuz yazıldı

2Kılavuz Yorumları

I have to change my shower handle, but the plumber asking me to change the shower valve also. But I can’t see any reason to replace the shower valve, is it really necessary to change it when changing shower handle.

Thanks.

Rose Geiger - Yanıt

This fixed the dripping shower head but now my shower handles are tight and difficult to turn and the water pressure is affected after replacing the o-rings. What could the issue be?

Cin - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 11

Son 7 gün: 44

Son 30 gün: 156

Her zaman: 23,641