Ana içeriğe geç

Giriş

The faceplate connects all of the internal wiring of the microphone. If it is defective (or wires need to be reattached to it), this guide shows how to replace it.

Parçalar

Hiçbir parça belirtilmedi.

  1. Remove the yellow and green wires from the face plate.
    • Remove the yellow and green wires from the face plate.

    • Note which side the yellow and green wires connect to.

  2. Android Tamir Setleri

    A new screen or battery is one kit away.

    Hemen Alışveriş Yapın

    Android Tamir Setleri

    A new screen or battery is one kit away.

    Hemen Alışveriş Yapın
  3. Never open the microphone capsule. Attempting to open the capsule will likely result in permanent damage and make the microphone unusable. Using an adjustable crescent wrench, remove the nut and washer from the face plate by twisting the nut counterclockwise.
    • Never open the microphone capsule. Attempting to open the capsule will likely result in permanent damage and make the microphone unusable.

    • Using an adjustable crescent wrench, remove the nut and washer from the face plate by twisting the nut counterclockwise.

  4. Slide the face plate over the connector. Slide the face plate over the connector.
    • Slide the face plate over the connector.

Sonuç

Follow the steps of the guide in reverse to reassemble the microphone. In order to solder wires back to faceplate use soldering guide.

nat coll

Üyelik tarihi: 27-09-2012

423 İtibar

14 adet Kılavuz yazıldı

Takım

Cal Poly, Team 7-53, Forte Fall 2012 Cal Poly, Team 7-53, Forte Fall 2012 üyesi

CPSU-FORTE-F12S7G53

5 Üyeler

18 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 Gün: 7

Son 30 Gün: 61

Her zaman: 6,695