Giriş

Taking out the LCD screen.

Parçalar

Hiçbir parçaya gerek yok.

Use the plastic opening tool to remove the 4 buttons on each corner of the Sidekick.
  • Use the plastic opening tool to remove the 4 buttons on each corner of the Sidekick.

  • Gently pry open button and remove button.

  • Do this for each of the 3 buttons remaining.

Yorum Ekle

The bumpers on the top and bottom of the phone can be removed by simply "peeling" them off.
  • The bumpers on the top and bottom of the phone can be removed by simply "peeling" them off.

Yorum Ekle

  • Use the Phillips head screwdriver to remove the 4 screws that are underneath the 4 buttons you removed in step one.

Yorum Ekle

  • Flip the screen up halfway (90 degrees), to reveal the 2 screws above the right side of the keyboard.

  • Use the Torx 6 screwdriver to remove these 2 screws.

  • Be careful in handling the phone after removing the screws, because the two main bodies of the phone are no longer attached.

Yorum Ekle

  • After removing the 6 screws and both bumpers, the phone will be easy to separate into the two main bodies.

  • You can use your hands to simply pull apart the top casing from the bottom casing.

Yorum Ekle

  • Flip the screen to its up position.

  • Remove screen from keyboard.

Yorum Ekle

  • Remove 4 screws from back of screen.

Yorum Ekle

  • Separate screen from housing with your fingers.

Yorum Ekle

  • Remove 4 screws

  • Pay attention to the orientation of the screen on the backing because it is difficult to reassemble.

Yorum Ekle

  • Remove LCD protective cover with your fingers.

Yorum Ekle

Bitiş Çizgisi

2 başka kişi bu kılavuzu tamamladı.

michael albaum

Üyelik tarihi: 20-01-2010

45 İtibar

6 adet Kılavuz yazıldı

Takım

Cal Poly, Team 3-19, Maness Winter 2010 Cal Poly, Team 3-19, Maness Winter 2010 üyesi

CPSU-MANESS-W10S3G19

4 Üyeler

11 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 3

Her zaman: 3,215