Ana içeriğe geç

Giriş

How to replace the Antennae power port board in the docking station of a SiriusXM Onyx Plus radio.

Parçalar

Hiçbir parça belirtilmedi.

  1. Remove the two 7.6mm Torx T6 screws from the back of the docking station. Remove the two 7.6mm Torx T6 screws from the back of the docking station.
    • Remove the two 7.6mm Torx T6 screws from the back of the docking station.

  2. MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now

    MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now
  3. Pull the back casing off.
    • Pull the back casing off.

  4. Once apart, lift the docking station motherboard up from the two pins that are located on the interior of the front casing.
    • Once apart, lift the docking station motherboard up from the two pins that are located on the interior of the front casing.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Angel Rivera

Üyelik tarihi: 25-01-2018

505 İtibar

5 adet Kılavuz yazıldı

Takım

USF Tampa, Team S7-G2, Passmore Spring 2018 USF Tampa, Team S7-G2, Passmore Spring 2018 üyesi

USFT-PASSMORE-S18S7G2

4 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 3

Son 30 Gün: 28

Her zaman: 279