Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Giriş

Using the chuck key, you'll be able to remove stuck drill bits that you couldn't free with your bare hands.

  1. Locate one of the indents in the side of the chuck. Line up the chuck key with this hole and the teeth right below it. Locate one of the indents in the side of the chuck. Line up the chuck key with this hole and the teeth right below it.
    • Locate one of the indents in the side of the chuck. Line up the chuck key with this hole and the teeth right below it.

  2. Turn the chuck key counter-clockwise.
    • Turn the chuck key counter-clockwise.

  3. Pull the drill bit free as the jaws loosen.
    • Pull the drill bit free as the jaws loosen.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Matt

Üyelik tarihi: 10-10-2010

365 İtibar

7 adet Kılavuz yazıldı

Takım

Cal Poly, Team 5-17, Maness Fall 2010 Cal Poly, Team 5-17, Maness Fall 2010 üyesi

CPSU-MANESS-F10S5G17

3 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 9

Son 30 gün: 52

Her zaman: 5,533