Giriş
This repair guide will walk through the primary steps of replacing the antenna in Skytex SP728.
Neye ihtiyacın var
-
-
-
Make sure the device is powered off
-
Rotate the device so the ports and screws face you
FixBot'a Sor
-
-
-
Using a plastic opening tool, work your way around the edge of the device, separating the case from the rest of the device
-
-
-
-
Once the case has been loosened, pry the backing off gently with your hands.
-
-
-
-
-
Use the soldering station and remove soldered connections to the antenna wires.
-
Now replace the antenna.
-
Follow the link below for additional soldering information "https://www.ifixit.com/Guide/How+To+Sold...
-
To reassemble your device, follow these instructions in reverse order.
İptal et: Bu kılavuzu tamamlamadım.
Bir başkası bu kılavuzu tamamladı.
Ekip
USF Tampa, Team 5-1, Brown Winter 2015 USF Tampa, Team 5-1, Brown Winter 2015 üyesi
USFT-BROWN-W15S5G1
4 Üyeler
11 adet Kılavuz yazıldı
