Eşyalarını Tamir Et Topluluk Mağaza

Skytex Skypad Alpha 2 Back Cover Replacement

Giriş

By following this guide one is able to access the inside of the Skytex Skypad Alpha 2 tablet in four steps. These steps include locating and unscrewing the screws that are found at the sides of the tablet and using a plastic opening tool to separate the back case from the tablet and replace if necessary.

Neye ihtiyacın var

  1. Skytex Skypad Alpha 2 Back Cover Replacement, Back Cover: adım 1, 1 resimden 1.

    • Power off the tablet.

    • Unplug the tablet from the power source if it is connected.

    Düzenle

  2. Skytex Skypad Alpha 2 Back Cover Replacement: adım 2, 2 resimden 1. Skytex Skypad Alpha 2 Back Cover Replacement: adım 2, 2 resimden 2.

    • Remove the (4) 3.5mm screws using a phillips #000 screwdriver.

    Düzenle

  4. Skytex Skypad Alpha 2 Back Cover Replacement: adım 3, 1 resimden 1.

    • Use the plastic opening tool to work your way around the tablet, releasing the back case from the tabs.

    Düzenle

  5. Skytex Skypad Alpha 2 Back Cover Replacement: adım 4, 1 resimden 1.

    • Release the back case from the rest of the tablet with your hand.

    • Do not pry the case too hard; doing so can damage the tablet.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Yazar

4 tane daha katılımcı ile

Elizabeth Wittliff

Üyelik tarihi: 09/25/15

176 İtibar

1 Kılavuz yazıldı

Rozetler: 11

+8 tane daha rozet

Ekip

Baylor, Team 6-5, Williams Fall 2015 Baylor, Team 6-5, Williams Fall 2015 üyesi

BU-WILLIAMS-F15S6G5

3 Üyeler

8 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 4

Son 30 gün: 14

Her zaman: 299