Adım 1 Preparation

• Keep in mind that there are many screws of varying length involved in the disassembly of this gun. It is important to group screws together by length to ensure proper reassembly.
• Be sure that the device has been discharged and is unloaded before beginning the disassembly.
Çevir
Yorum Ekle
Yorum Ekle
Yorum Ekle
1024
İptal Yorum gönder
Adım 2 Remove



• Point the barrel of the device to the left. Remove the two 8mm philips head screws (the two top screws) holding the device slide together.
• Keep the barrel of the gun pointing to the left. Remove the three 10 mm philips head screws from the bottom of the device slide.
Çevir
Yorum Ekle
Yorum Ekle
Yorum Ekle
1024
İptal Yorum gönder
Adım 3 Separate the halves
• Once all the screws are removed, separate the two halves of the device slide and put them aside.
• Be sure to keep track of which screws correspond to the correct holes.
Çevir
Yorum Ekle
Yorum Ekle
Yorum Ekle
1024
İptal Yorum gönder

Bu kılavuzu göm

Bu kılavuzu, sitenizin / forumunuzun içine küçük bir parçacık olarak yerleştirmek için, bir boyut seçin ve aşağıdaki kodu kopyalayın.

<iframe id="dozuki-embed-125620" src="https://tr.ifixit.com/Guide/embed/125620/full" width="800" allowfullscreen frameborder="0"></iframe> <script>window.addEventListener("message",function(a){var b=document.getElementById("dozuki-embed-125620"),c=a.data[0],d=a.data[1];switch(c){case"setHeight":b.style.height=d+"px"}},!1);</script> <iframe src="https://tr.ifixit.com/Guide/embed/125620" width="800" height="584" allowfullscreen frameborder="0"></iframe>

Önizleme