Giriş
This guide will show how to take apart and repair the small engine recoil starter on a lawn mower.
Neye ihtiyacın var
-
-
-
To begin the repair remove the protective casing. (This removal may vary with different lawnmowers.)
FixBot'a Sor
-
-
-
-
After removing the recoil, unscrew the cap that holds the pulley to the recoil starter housing.
-
-
-
With this particular model there is a middle lock piece. Use a socket wrench to unscrew and release the coil.
-
-
-
Once unscrewed, remove the metal piece which releases the tension on the coil.
-
-
-
At this point add the new coil to the housing base. Snap the coil into position where the old on was.
-
-
To reassemble your device, follow these instructions in reverse order.
İptal et: Bu kılavuzu tamamlamadım.
5 farklı kişi bu kılavuzu tamamladı.
Ekip
Missouri Western, Team S40-G16, Kunkel Spring 2017 Missouri Western, Team S40-G16, Kunkel Spring 2017 üyesi
MWSU-KUNKEL-S17S40G16
2 Üyeler
6 adet Kılavuz yazıldı
