Ana içeriğe geç

Sol Republic Deck Bluetooth Button Replacement

Neye ihtiyacın var

  1. Sol Republic Deck Bluetooth Button Replacement, Bluetooth Button: adım 1, 1 resimden 1.
    • With plastic spudger wedge in between the top and bottom casings to force sepearation . Exposing the inside components of the Republic Deck.

  2. Sol Republic Deck Bluetooth Button Replacement: adım 2, 1 resimden 1.
    • Use the screwdriver to unscrew two 3.6mm Phillips #0 screws securing the plastic plate.

  3. Sol Republic Deck Bluetooth Button Replacement: adım 3, 1 resimden 1.
    • Remove the ribbon cable from the circuit board.

  4. Sol Republic Deck Bluetooth Button Replacement: adım 4, 1 resimden 1.
    • Plug in de-soldering kit and wait 3 minutes for the solder to heat up.

    • Use the tip of your soldering iron to heat the old solder unit and apply until it melts.

    • Remove speaker wires connecting the speaker to the circuit board.

  5. Sol Republic Deck Bluetooth Button Replacement: adım 5, 1 resimden 1.
    • Unscrew five 3.6 mm Phillips #0 screws securing the circuit board.

  6. Sol Republic Deck Bluetooth Button Replacement: adım 6, 1 resimden 1.
    • Unscrew fifteen 6.2mm Phillips #0 screws and lift the black plastic plate from the case.

  7. Sol Republic Deck Bluetooth Button Replacement: adım 7, 2 resimden 1. Sol Republic Deck Bluetooth Button Replacement: adım 7, 2 resimden 2.
    • Remove the three 3.6mm Phillips #0 screws.

    • Remove the circuit board containing the BlueTooth button.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Jonathan Holtman

Üyelik tarihi: 03/20/17

368 İtibar

2 adet Kılavuz yazıldı

Ekip

IUPUI, Team S3-G1, Baechle Spring 2017 IUPUI, Team S3-G1, Baechle Spring 2017 üyesi

IUPUI-BAECHLE-S17S3G1

3 Üyeler

3 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 2

Her zaman: 545