Ana içeriğe geç

Giriş

The LCD screen can be pulled out to a couple of different angles. However, be careful when angling it because it does have restrictions. Doing so past those restrictions will break the LCD bracket holding it in place.

Parçalar

Hiçbir parça belirtilmedi.

  1. Orient the camera so that the LCD screen is facing you.
    • Orient the camera so that the LCD screen is facing you.

  2. Lift the LCD screen to unscrew the 2 screws on its underside.
    • Lift the LCD screen to unscrew the 2 screws on its underside.

  3. Android Tamir Setleri

    Yeni bir ekran veya pil, bir tamir kiti kadar yakınında.

    Hemen Alışveriş Yapın

    Android Tamir Setleri

    Yeni bir ekran veya pil, bir tamir kiti kadar yakınında.

    Hemen Alışveriş Yapın
  4. Unscrew the 2 screws on the bottom of the LCD screen.
    • Unscrew the 2 screws on the bottom of the LCD screen.

  5. Carefully remove the back of the LCD cover.
    • Carefully remove the back of the LCD cover.

  6. Carefully pull up the LCD front cover from the metal internal frame.
    • Carefully pull up the LCD front cover from the metal internal frame.

    • Be careful of the wire ribbon as it is fragile.

Sonuç

To reassemble your device, follow these instructions in reverse order.

3 farklı kişi bu kılavuzu tamamladı.

3 Comments

And the how do you change the LCD screen please ? How to remove it ?

timothee.ferreol - Yanıt

I have the exact same question, I need to change the screen with flex cable as well. Thanks, there isn’t a lot of info on the a7s 2, it’s all a7r out there

Viro Films - Yanıt

Hello. My LCD backlight stop working after water came into the camera (snow). With a flash light I was able to determine it is the backlight since I was able to detect some menu items on the screen. I bought a replacement LDC unit, my thinking was that the backlight itself was damaged and a new one would do the trick. After replacing the screen, I have the same probleme. So I suppose my problem come from deeper in the camera. The camera itself do not command the backlight to turn on. Is there something I can do? any more troubleshooting?

Thanks!

Jean-Philippe Archibald - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Past 24 Hours: 7

Past 7 Days: 38

Past 30 Days: 202

Her zaman: 1,545