Eşyalarını Tamir Et Topluluk Mağaza

Sony Bloggie 3D Player Back Cover Replacement

Giriş

This guide will detail the steps necessary to remove the back cover of the Sony Bloggie 3D Player.

Neye ihtiyacın var

  1. Sony Bloggie 3D Player Back Cover Replacement, Front Cover: adım 1, 1 resimden 1.

    • Remove the two 2.5mm Phillips #00 screws using the Philips #00 screwdriver.

    Düzenle

  2. Sony Bloggie 3D Player Back Cover Replacement: adım 2, 2 resimden 1. Sony Bloggie 3D Player Back Cover Replacement: adım 2, 2 resimden 2.

    • Use a plastic opening tool to pry the cover open.

    • After the the cover is partly open as shown, remove the cover with your hands.

    Düzenle

  4. Sony Bloggie 3D Player Back Cover Replacement, Back Cover: adım 3, 2 resimden 1. Sony Bloggie 3D Player Back Cover Replacement, Back Cover: adım 3, 2 resimden 2.
    Bu adımda kullanılan alet:
    Tweezers
    $4.99
    Satın Al

    • Using your hand, or a pair of tweezers, remove the ZIF connector by gently pulling it out of the dock on the circuit board.

    Düzenle

  5. Sony Bloggie 3D Player Back Cover Replacement: adım 4, 2 resimden 1. Sony Bloggie 3D Player Back Cover Replacement: adım 4, 2 resimden 2.

    • Use a plastic opening tool to loosen the back cover off the device.

    • Once the back cover is loose, remove it gently by hand.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

7 tane daha katılımcı ile

Timothy Tran

Üyelik tarihi: 01/30/13

1 İtibar

2 adet Kılavuz yazıldı

Rozetler: 4

+1 tane daha rozet

Ekip

Cal Poly, Team 7-12, Maness Winter 2013 Cal Poly, Team 7-12, Maness Winter 2013 üyesi

CPSU-MANESS-W13S7G12

5 Üyeler

15 adet Kılavuz yazıldı

0Kılavuz Yorumları

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 26

Her zaman: 438