Eşyalarını Tamir Et Topluluk Mağaza

Sony Bloggie 3D Player Main Button's Circuit Board Replacement

Giriş

Whether it's due to dust, wear, or physical damage, the main button circuit board may need to be replaced at some point. This guide focuses on how to install a new main button circuit board to get your Sony Bloggie 3D Player running like new.

Neye ihtiyacın var

  1. Sony Bloggie 3D Player Main Button's Circuit Board Replacement, Front Cover: adım 1, 1 resimden 1.

    • Remove the two 2.5mm Phillips #00 screws using the Philips #00 screwdriver.

    Düzenle

  3. Sony Bloggie 3D Player Main Button's Circuit Board Replacement: adım 2, 2 resimden 1. Sony Bloggie 3D Player Main Button's Circuit Board Replacement: adım 2, 2 resimden 2.

    • Use a plastic opening tool to pry the cover open.

    • After the the cover is partly open as shown, remove the cover with your hands.

    Düzenle

  4. Sony Bloggie 3D Player Main Button's Circuit Board Replacement, Main Button's Circuit Board: adım 3, 2 resimden 1. Sony Bloggie 3D Player Main Button's Circuit Board Replacement, Main Button's Circuit Board: adım 3, 2 resimden 2.
    Bu adımda kullanılan alet:
    Tweezers
    $4.99
    Satın Al

    • Detach the board from the ZIF connector using a pair of tweezers or by hand.

    • Flip the circuit board over and remove the connector on the backside. Now you can safely remove the circuit board.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Yazar

8 tane daha katılımcı ile

Robert Tam

Üyelik tarihi: 01/30/13

21 İtibar

2 adet Kılavuz yazıldı

Rozetler: 8

+5 tane daha rozet

Ekip

Cal Poly, Team 7-12, Maness Winter 2013 Cal Poly, Team 7-12, Maness Winter 2013 üyesi

CPSU-MANESS-W13S7G12

5 Üyeler

15 adet Kılavuz yazıldı

0Kılavuz Yorumları

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 23

Her zaman: 419