Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Giriş

This guide will show how to replace a bad fuse, which will cause the device not to turn on.

Before any repair work can be done, one must remove the device from the vehicle. To do so follow this link to see a vehicle general removal of a stereo system.

  1. Locate the clip on the wiring harness.
    • Locate the clip on the wiring harness.

  2. Press down on the clip like you would an Ethernet cable. Rock harness side to side, pulling gently towards you until harness detaches.
    • Press down on the clip like you would an Ethernet cable.

    • Rock harness side to side, pulling gently towards you until harness detaches.

  3. Once you have removed the wiring harness.
    • Once you have removed the wiring harness.

    • Locate the fuse.

  4. Using your index finger and thumb on either side of the fuse.
    • Using your index finger and thumb on either side of the fuse.

  5. Rock back and forth gently pulling towards yourself until the fuse is removed.
    • Rock back and forth gently pulling towards yourself until the fuse is removed.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Odelkys Marquez

Üyelik tarihi: 22-09-2014

1.022 İtibar

7 adet Kılavuz yazıldı

Takım

USF Tampa, Team 10-2, Brown Fall 2014 USF Tampa, Team 10-2, Brown Fall 2014 üyesi

USFT-BROWN-F14S10G2

3 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 12

Son 30 gün: 85

Her zaman: 5,737