Giriş

Use this guide if your radio is not working and the antenna needs to be replaced. This is an easy part to replace and requires a standard Phillips #1 screwdriver.

Parçalar

Hiçbir parçaya gerek yok.

Unscrew the screw attaching the antenna to the boombox with a Phillips #1 screwdriver. Once unscrewed, the antenna can be removed from the boombox by lifting it up and out of the hole. Once unscrewed, the antenna can be removed from the boombox by lifting it up and out of the hole.
  • Unscrew the screw attaching the antenna to the boombox with a Phillips #1 screwdriver.

    • Once unscrewed, the antenna can be removed from the boombox by lifting it up and out of the hole.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

3 başka kişi bu kılavuzu tamamladı.

Tess

Üyelik tarihi: 14-10-2014

419 İtibar

2 adet Kılavuz yazıldı

Takım

Cal Poly, Team 10-38, Amido Fall 2014 Cal Poly, Team 10-38, Amido Fall 2014 üyesi

CPSU-AMIDO-F14S10G38

5 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 9

Son 30 Gün: 33

Her zaman: 1,001