Giriş

Use this guide to remove and replace the speakers in the Sony CFD-8 boombox.

Parçalar

Hiçbir parçaya gerek yok.

Hold the boombox handle at an angle to access the screws behind the CD player.
  • Hold the boombox handle at an angle to access the screws behind the CD player.

  • Use a Phillips #1 screwdriver to unscrew the top two 14 mm screws. You may need a flashlight to see the screws.

Yorum Ekle

Remove four 14 mm screws using a Phillips #1 screwdriver. Two of these screws are at the bottom of the boombox and the other two are on either side of the boombox as highlighted in the related images.
  • Remove four 14 mm screws using a Phillips #1 screwdriver. Two of these screws are at the bottom of the boombox and the other two are on either side of the boombox as highlighted in the related images.

  • All four screws have black arrows (not visible in the photo) indicating their location on the boombox.

Yorum Ekle

  • Gently separate the front panel from the back panel.

  • Remove the two connections holding the front panel to boombox.

    • One connection is located on the upper left hand side of the main circuit board.

    • The other is a large white strip slightly to the right of the cassette player.

    • Do not touch the cylindrical parts on the circuit board. These are capacitors and may deliver a shock!

  • Remove the front panel.

Yorum Ekle

  • Use a 14cm Phillips #1 screwdriver to remove the four respective screws attaching the left and right speakers to the front panel.

Yorum Ekle

  • Remove the speakers from the front panel.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Liam Kirsh

Üyelik tarihi: 14-10-2014

155 İtibar

1 Kılavuz yazıldı

Takım

Cal Poly, Team 10-38, Amido Fall 2014 Cal Poly, Team 10-38, Amido Fall 2014 üyesi

CPSU-AMIDO-F14S10G38

5 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 Gün: 7

Son 30 Gün: 35

Her zaman: 1,441