Eşyalarını Tamir Et Topluluk Mağaza

Sony Clie PEG-UX50 Rear Case Replacement

Giriş

Rear Cover Removal allows the inside of the Clie to be exposed for further replacement of internal components

Neye ihtiyacın var

  1. Sony Clie PEG-UX50 Rear Case Replacement, Rear Case: adım 1, 1 resimden 1.

    • Tools Needed

    • Phillips Screwdriver

    • Tweezers

    Düzenle

  2. Sony Clie PEG-UX50 Rear Case Replacement: adım 2, 3 resimden 1. Sony Clie PEG-UX50 Rear Case Replacement: adım 2, 3 resimden 2. Sony Clie PEG-UX50 Rear Case Replacement: adım 2, 3 resimden 3.

    • Using Phillips screwdriver, remove 4 screws from the rear cover.

    • Remove 1 screw from the right side.

    • Remove 1 screw from the top

    Düzenle

  3. Sony Clie PEG-UX50 Rear Case Replacement: adım 3, 2 resimden 1. Sony Clie PEG-UX50 Rear Case Replacement: adım 3, 2 resimden 2.

    • Gently pry rear cover to remove USB port cover and Hold Switch.

    Düzenle

  4. Sony Clie PEG-UX50 Rear Case Replacement: adım 4, 2 resimden 1. Sony Clie PEG-UX50 Rear Case Replacement: adım 4, 2 resimden 2.

    • Remove side cover.

    • Gently pull the rear cover to separate from device.

    Düzenle

  5. Sony Clie PEG-UX50 Rear Case Replacement: adım 5, 1 resimden 1.

    • Slowly pull rear cover from device being careful not to pull the speaker connection wire.

    • Remove speaker wire from device.

    • The rear cover is now separated from the device.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

5 tane daha katılımcı ile

Christopher M Garcia

Üyelik tarihi: 04/28/11

11 İtibar

1 Kılavuz yazıldı

Rozetler: 4

+1 tane daha rozet

Ekip

CSU Los Angeles, Team 1-4, Nelson Spring 2011 CSU Los Angeles, Team 1-4, Nelson Spring 2011 üyesi

CSULA-NELSON-S11S1G4

5 Üyeler

2 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 gün: 13

Son 30 gün: 27

Her zaman: 4,085