Giriş

The Sony Clie PEG-UX50 has a separate tilt screen mechanism that does not require the user to dismantle the battery plate in order to get to the display .

Parçalar

Hiçbir parçaya gerek yok.

  1. Take off the screws located on the 2 sides of the tilt screen.
    • Take off the screws located on the 2 sides of the tilt screen.

    • Unscrew the screw located at the tilt base of the screen

    Yorum Ekle

  2. Gently remove back plate of tilt screen by sliding upward.
    • Gently remove back plate of tilt screen by sliding upward.

    • With caution, lift wires from the track in the back plate

    Yorum Ekle

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Disconnect the thin bus cable attached to the Integrated Circuit

    Yorum Ekle

    • Detach the plastic black frame from in between the plate and lcd.

    • Do not disconnect the display from the board yet.

    Yorum Ekle

    • Disconnect the thin connector from the face plate using the tweezer

    Yorum Ekle

    • With your hands, quick-release and disconnect the thick cable

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Rishad R Rai

Üyelik tarihi: 28-04-2011

1 İtibar

1 Kılavuz yazıldı

Takım

CSU Los Angeles, Team 1-4, Nelson Spring 2011 CSU Los Angeles, Team 1-4, Nelson Spring 2011 üyesi

CSULA-NELSON-S11S1G4

5 Üyeler

2 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 1

Her zaman: 2,275