Skip to main content

Giriş

It's important to ensure the wrist strap of this camera is in working order to help prevent damage from falls onto hard or hazardous surfaces that can harm the device.

  1. Using your finger, slide the release catch to unlock the battery/memory card cover. Using your finger, slide the release catch to unlock the battery/memory card cover.
    • Using your finger, slide the release catch to unlock the battery/memory card cover.

  2. Open the battery/memory card door. Open the battery/memory card door.
    • Open the battery/memory card door.

  3. Push the battery eject lever to free the battery. Push the battery eject lever to free the battery.
    • Push the battery eject lever to free the battery.

  4. Remove the battery from the device.
    • Remove the battery from the device.

  5. Using a Phillips #00 screwdriver, remove one black 2 2/5mm screw that is located next to the wrist band  loop.
    • Using a Phillips #00 screwdriver, remove one black 2 2/5mm screw that is located next to the wrist band loop.

  6. Using the plastic opening tool, separate the edge-casing from the rest of the camera.
    • Using the plastic opening tool, separate the edge-casing from the rest of the camera.

  7. Android Tamir Setleri

    Yeni bir ekran veya pil, bir tamir kiti kadar yakınında.

    Hemen Alışveriş Yapın

    Android Tamir Setleri

    Yeni bir ekran veya pil, bir tamir kiti kadar yakınında.

    Hemen Alışveriş Yapın
  8. Pull the edge-casing off of the camera. Pull the edge-casing off of the camera.
    • Pull the edge-casing off of the camera.

  9. Using a Phillips #00 screwdriver, remove one silver 3mm screw located on the front side of the camera.
    • Using a Phillips #00 screwdriver, remove one silver 3mm screw located on the front side of the camera.

    • Using a Phillips #00 screwdriver, remove one silver 5 2/5mm screw located on the front side of the camera

    • Using a Phillips #00 screwdriver, remove one black 2 1/2mm screw located on the front side of the camera.

  10. Using a Phillips #00 screwdriver, remove one 2 1/2mm screw located near the wrist strap.
    • Using a Phillips #00 screwdriver, remove one 2 1/2mm screw located near the wrist strap.

  11. Using a Phillips #00 screwdriver remove one black 2 2/5mm screw near the tripod slot on the bottom of the casing.
    • Using a Phillips #00 screwdriver remove one black 2 2/5mm screw near the tripod slot on the bottom of the casing.

  12. Using a Phillips #00 screwdriver remove the two 2 2/5mm black screws from the side of the camera opposite of the wrist strap
    • Using a Phillips #00 screwdriver remove the two 2 2/5mm black screws from the side of the camera opposite of the wrist strap

  13. Using the plastic opening tool, open the device's outer shell. Using the plastic opening tool, open the device's outer shell.
    • Using the plastic opening tool, open the device's outer shell.

  14. Remove the front casing of the device. Remove the front casing of the device.
    • Remove the front casing of the device.

  15. Using the plastic opening tool, remove the back casing of the device. Using the plastic opening tool, remove the back casing of the device. Using the plastic opening tool, remove the back casing of the device.
    • Using the plastic opening tool, remove the back casing of the device.

  16. Using a Phillips #00 screwdriver , remove two silver 3mm screws from the side of the device.
    • Using a Phillips #00 screwdriver , remove two silver 3mm screws from the side of the device.

  17. Using your fingers, remove the silver wrist band holster from the device.
    • Using your fingers, remove the silver wrist band holster from the device.

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 4

All Time: 246