Eşyalarını Tamir Et Topluluk Mağaza

Sony Cyber-Shot DSC-TX9 LED Screen Replacement

Arşivlenmiş Kılavuz
Bu kılavuz sadece arşivsel amaçlarla muhafaza edilmiştir. Onarımınızı gerçekleştirmek için kılavuzun güncel halini kullanın.

Giriş

You will need a 001 screw driver and a pry stick for this repair.

Neye ihtiyacın var

  1. Sony Cyber-Shot DSC-TX9 LED Screen Replacement, LED Screen: adım 1, 3 resimden 1. Sony Cyber-Shot DSC-TX9 LED Screen Replacement, LED Screen: adım 1, 3 resimden 2. Sony Cyber-Shot DSC-TX9 LED Screen Replacement, LED Screen: adım 1, 3 resimden 3.

    • Remove all screws on the outside of the camera. A total of 6 screws will be removed.

    • Use a 0001 screw. Note: That the first two screws are in the first circle.

    Düzenle

  2. Sony Cyber-Shot DSC-TX9 LED Screen Replacement: adım 2, 3 resimden 1. Sony Cyber-Shot DSC-TX9 LED Screen Replacement: adım 2, 3 resimden 2. Sony Cyber-Shot DSC-TX9 LED Screen Replacement: adım 2, 3 resimden 3.

    • Once all screws are removed slide open the battery cover.

    • Pop off the front plate of the camera by moving the two pieces away from each other.

    • The front plate will partially be attached to the body of the camera by a ribbon. Detach with caution.

    • Next, remove the two silver screws on the inside of the camera.

    Düzenle

  4. Sony Cyber-Shot DSC-TX9 LED Screen Replacement: adım 3, 2 resimden 1. Sony Cyber-Shot DSC-TX9 LED Screen Replacement: adım 3, 2 resimden 2.

    • Pop off the back plate of the camera by gently pulling the inner plate out.

    • After the back plate is removed, the camera should appear like the second picture. The LED screen should be free and accessible to replace.

    Düzenle

  5. Sony Cyber-Shot DSC-TX9 LED Screen Replacement: adım 4, 1 resimden 1.

    • Use a pry stick to pop out the connector ribbon attached to the LCD screen.

    • A pair of tweezers may be needed to pull back a black slit to access the ribbon connector.

    Düzenle

  6. Sony Cyber-Shot DSC-TX9 LED Screen Replacement: adım 5, 1 resimden 1.

    • Attach the new LCD screen.

    • Follow the previous steps in reverse to put the camera back together.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Yazar

4 tane daha katılımcı ile

Melissa Pavelka

Üyelik tarihi: 09/24/15

131 İtibar

1 Kılavuz yazıldı

Rozetler: 5

+2 tane daha rozet

Ekip

Texas Tech, Team 19-1, Rauch Fall 2015 Texas Tech, Team 19-1, Rauch Fall 2015 üyesi

TTU-RAUCH-F15S19G1

4 Üyeler

1 Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 379