Ana içeriğe geç

Giriş

This guide will teach you how to take off the screen on the Sony Cyber-shot DSC-H300.

Parçalar

Hiçbir parça belirtilmedi.

  1. Remove the 6mm Phillips #000 screws. Remove the 6mm Phillips #000 screws. Remove the 6mm Phillips #000 screws.
    • Remove the 6mm Phillips #000 screws.

  2. Remove the five 6mm Phillips #000 screws. Remove the four 3mm Phillips #000 screws. Remove the four 3mm Phillips #000 screws.
    • Remove the five 6mm Phillips #000 screws.

    • Remove the four 3mm Phillips #000 screws.

  3. MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now

    MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now
  4. Use the flat end of a  plastic spudger to pry apart the rear cover from the body of the camera.
    • Use the flat end of a plastic spudger to pry apart the rear cover from the body of the camera.

  5. Remove the two 6mm Phillips #000 screws.
    • Remove the two 6mm Phillips #000 screws.

  6. The screen will be loose so remove it.
    • The screen will be loose so remove it.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Zachary Meyer

Üyelik tarihi: 14-02-2018

383 İtibar

3 adet Kılavuz yazıldı

Takım

USF Tampa, Team S1-G6, Nance Spring 2018 USF Tampa, Team S1-G6, Nance Spring 2018 üyesi

USFT-NANCE-S18S1G6

3 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 5

Son 7 Gün: 7

Son 30 Gün: 31

Her zaman: 329