Giriş

This is a step-by-step guide to disassembling and replacing the flash in the Sony Cyber-shot camera.

First locate the appropriate screws for detachment.
  • First locate the appropriate screws for detachment.

Yorum Ekle

Remove the five screws shown using a Phillips #00 Screwdriver.
  • Remove the five screws shown using a Phillips #00 Screwdriver.

  • It is important to put the small screws in a safe location in order to reassemble the casing.

Yorum Ekle

  • Using a spudger, carefully pry open the front casing.

Yorum Ekle

  • Carefully separate the front casing from the camera body.

  • CAUTION: Be careful not to break the wire connecting the front casing and the camera.

Yorum Ekle

  • Using tweezers, gently pull the ribbon trace out of its housing found on the left side of the flash.

Yorum Ekle

  • Using a spudger, pry the small latch between the lens and the flash open to release the flash.

  • Pull the flash away from the camera.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Katie McCraw

Üyelik tarihi: 09-03-2012

191 İtibar

7 adet Kılavuz yazıldı

Takım

Clemson, Team 1-5, Benson Spring 2012 Clemson, Team 1-5, Benson Spring 2012 üyesi

CLEM-BENSON-S12S1G5

4 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 Gün: 2

Son 30 Gün: 9

Her zaman: 1,867