First locate the appropriate screws for detachment. First locate the appropriate screws for detachment. First locate the appropriate screws for detachment.
  • First locate the appropriate screws for detachment.

Yorum Ekle

Remove the five screws shown using a Phillips #00 Screwdriver.
  • Remove the five screws shown using a Phillips #00 Screwdriver.

  • It is important to put the small screws in a safe location in order to reassemble the casing.

Yorum Ekle

Using a spudger, carefully pry open the front casing.
  • Using a spudger, carefully pry open the front casing.

Yorum Ekle

Carefully separate the front casing from the camera body. CAUTION: Be careful not to break the wire connecting the front casing and the camera.
  • Carefully separate the front casing from the camera body.

  • CAUTION: Be careful not to break the wire connecting the front casing and the camera.

Yorum Ekle

It is necessary to first locate the appropriate screws in order to disassemble the back casing. It is necessary to first locate the appropriate screws in order to disassemble the back casing. It is necessary to first locate the appropriate screws in order to disassemble the back casing.
  • It is necessary to first locate the appropriate screws in order to disassemble the back casing.

Yorum Ekle

Remove the found screws with a small screwdriver.
  • Remove the found screws with a small screwdriver.

  • It is important to put the small screws in a safe location in order to reassemble the casing.

Yorum Ekle

Carefully pull the back casing away from the camera.
  • Carefully pull the back casing away from the camera.

Yorum Ekle

The back casing is now removed from the camera.
  • The back casing is now removed from the camera.

Yorum Ekle

Remove the two screws on the back side of the camera surrounding the LCD screen. Remove the two screws on the back side of the camera surrounding the LCD screen.
  • Remove the two screws on the back side of the camera surrounding the LCD screen.

Yorum Ekle

Remove the two ribbon traces found on the left side of the lens on the front of camera holding the lens in place. Carefully pull the lens away front the camera until it is released. Carefully pull the lens away front the camera until it is released.
  • Remove the two ribbon traces found on the left side of the lens on the front of camera holding the lens in place.

  • Carefully pull the lens away front the camera until it is released.

Yorum Ekle

The lens is now successfully removed from the camera.
  • The lens is now successfully removed from the camera.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Katie McCraw

Üyelik tarihi: 09-03-2012

191 İtibar

7 adet Kılavuz yazıldı

Takım

Clemson, Team 1-5, Benson Spring 2012 Clemson, Team 1-5, Benson Spring 2012 üyesi

CLEM-BENSON-S12S1G5

4 Üyeler

7 adet Kılavuz yazıldı

Bir Yorum

Is there a way to disassemble the lens to correct the alignment. My daughter dropped it and I think the mechanism has been misaligned.

Macjune Tolentino - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 3

Her zaman: 2,204