Giriş

Disassembling the back cover of the camera so that we can repair components from the inside.

  1. Slide the battery cover in the direction the arrow points.
    • Slide the battery cover in the direction the arrow points.

    • Pull the battery cover towards you.

    Yorum Ekle

  2. Flick the blue switch for the battery to pop out.
    • Flick the blue switch for the battery to pop out.

    • Remove the battery from the camera.

    Yorum Ekle

    • Using the Phillips #00 Screwdriver, remove the two screws from the caution panel.

    • Remove that panel.

    • Careful for falling pieces.

    Yorum Ekle

    • Remove the screw with a Phillips #00 Screwdriver from the right side of the camera (with '3x optical zoom' engraved on the side panel).

    • Remove that panel.

    Yorum Ekle

    • Remove the screw using the Phillips #00 Screwdriver from the bottom the camera, closest to the back cover.

    Yorum Ekle

    • Gently remove the back cover.

    • It may be a bit stiff, so use some force to remove it. Proceed with caution.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

kkfong91

Üyelik tarihi: 11-10-2010

293 İtibar

2 adet Kılavuz yazıldı

Takım

Cal Poly, Team 9-20, Regan Fall 2010 Cal Poly, Team 9-20, Regan Fall 2010 üyesi

CPSU-REGAN-F10S9G20

5 Üyeler

9 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 1

Her zaman: 3,249