Giriş
Make sure you have the necessary tools in order to complete the lens replacement for the Sony Cyber Shot WX80 and be sure to have a steady hand when dealing with the smaller and more fragile parts.
Neye ihtiyacın var
-
-
Begin by removing all six 40mm by 10mm black screws holding the outer frame together with the Phillips #00 screwdriver.
-
-
-
-
Remove the #00 screw from the right hand side (from the LCD screen side) which is adjacent to the master control dial.
-
Use a spudger or plastic opening tools to pry up the LCD screen and free the two metal tangs on the left side.
-
Lift up two more metal tabs held down by a thin red plastic strap on the right (master control dial) side. Reference the third image.
-
-
Bu adımda kullanılan alet:Tweezers$4.99
-
Using a pair of tweezers, remove the blue ribbon from its connection located toward to the top right of the device.
-
Using a pair of tweezers, remove the gold ribbon from its connection located to the right of the removed blue ribbon.
-
Your LCD screen is now removed and you can replace it!
-
-
-
After the LCD screen has been removed there is a black metal plate that can be pulled off revealing the motherboard and the lens.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
İptal et: Bu kılavuzu tamamlamadım.
2 farklı kişi bu kılavuzu tamamladı.
Ekip
Eastern Washington University, Team 2-5, Matresse Spring 2015 Eastern Washington University, Team 2-5, Matresse Spring 2015 üyesi
EWU-MATRESSE-S15S2G5
4 Üyeler
7 adet Kılavuz yazıldı
