Ana içeriğe geç

Giriş

If the device is on but nothing shows up on the screen, the screen may need to be replaced.

Parçalar

Hiçbir parça belirtilmedi.

  1. Use your hand to remove the small back cover. Use your hand to remove the small back cover.
    • Use your hand to remove the small back cover.

  2. Remove the two 0.473" pan head screws.
    • Remove the two 0.473" pan head screws.

  3. The screen should now detach from the main device.
    • The screen should now detach from the main device.

    • The screen will still be connected by the wires.

  4. Remove the wires attached to the white base by using the tweezers. Remove the wires attached to the white base by using the tweezers.
    • Remove the wires attached to the white base by using the tweezers.

  5. Do the same with the wires attached to the black base. Do the same with the wires attached to the black base.
    • Do the same with the wires attached to the black base.

  6. MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now

    MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now
  7. The screen should now be completely separated from the main device.
    • The screen should now be completely separated from the main device.

  8. Remove the four rubber feet and the screws beneath.
    • Remove the four rubber feet and the screws beneath.

    • Remove the two exposed screws on the left side.

    • Pull back the cables until the screw is visible.

  9. Using the spudger, separate the top and bottom covers.
    • Using the spudger, separate the top and bottom covers.

  10. Identify the gray back of the screen.
    • Identify the gray back of the screen.

  11. Remove the screws.
    • Remove the screws.

  12. Remove the metal plates.
    • Remove the metal plates.

  13. Using spudger, push the lock clips to unlock the ribbon cable. Using tweezers, pull the connector loose.
    • Using spudger, push the lock clips to unlock the ribbon cable.

    • Using tweezers, pull the connector loose.

  14. Place your hand on the front of the screen and push upwards. Place your hand on the front of the screen and push upwards.
    • Place your hand on the front of the screen and push upwards.

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Oliver Woolsoncroft

Üyelik tarihi: 20-01-2012

69 İtibar

2 adet Kılavuz yazıldı

Takım

Cal Poly, Team 11-21, Maness Winter 2012 Cal Poly, Team 11-21, Maness Winter 2012 üyesi

CPSU-MANESS-W12S11G21

4 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 2

Son 30 Gün: 6

Her zaman: 2,261