Giriş

Please note: you must remove the screws from the back casing before beginning this guide.

  1. Remove 4 screws from battery chamber
    • Remove 4 screws from battery chamber

    • Red - Phillips 0 screwdriver

    • Blue - Torx 6 screwdriver

  2. Gently pry off back casing
    • Gently pry off back casing

    • Note: work shim or flathead screwdriver around entire seam before attempting to pull off casing. This will reduce the chance of cracking the casing.

  3. Pro Tech Toolkit içeren veya $100tüm siparişlerde ücretsiz kargo!

    Mağazamıza Göz Atın
  4. Remove casing to expose camera components
    • Remove casing to expose camera components

  5. Gently pry open front casing by working a small shim or flathead screwdriver along the entire seam
    • Gently pry open front casing by working a small shim or flathead screwdriver along the entire seam

  6. Remove front casing by gently lifting it from the phone
    • Remove front casing by gently lifting it from the phone

    • Be careful not to pull off any other delicate pieces

  7. Keypad should be easy to remove Caution: LCD screen is very fragile. Be careful not to catch the keypad on it while removing.
    • Keypad should be easy to remove

    • Caution: LCD screen is very fragile. Be careful not to catch the keypad on it while removing.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Abby Evers

Üyelik tarihi: 04-10-2011

196 İtibar

6 adet Kılavuz yazıldı

Takım

UW Stout, Team 1-6, Zhou Fall 2011 UW Stout, Team 1-6, Zhou Fall 2011 üyesi

UWSTOUT-ZHOU-F11S1G6

4 Üyeler

12 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 2

Son 30 Gün: 5

Her zaman: 3,005