Giriş

This guide will assist you in removing the logic board from your Sony Ericsson T68i.

Parçalar

Hiçbir parçaya gerek yok.

  1. Remove the battery from the back.
    • Remove the battery from the back.

    Yorum Ekle

  2. Pry off the plastic cover from the top with a thin plastic shim, then remove it from the two bottom clips.
    • Pry off the plastic cover from the top with a thin plastic shim, then remove it from the two bottom clips.

    • Do not bend it too far down, or else you risk breaking the two bottom clips.

    Yorum Ekle

    • Unscrew all four Torx T6 screws.

    • Keep in a safe place.

    Yorum Ekle

  3. Free shipping on orders over $20
    Use code BLUEANDBLACK at checkout
    Free shipping on orders over $20
    Use code BLUEANDBLACK
    • After removing the screws, the two halves will separate. If not, then pry them gently apart.

    Yorum Ekle

    • Remove the circuit board and screen from the device.

    • Use your T6 to remove the 4 screws.

    Yorum Ekle

    • Remove the board and screen.

    Yorum Ekle

    • Carefully remove the plastic clips holding the screen on the board.

    Yorum Ekle

    • Remove the plate protecting the more delicate processing parts from the logic board.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Tim Dascomb

Üyelik tarihi: 13-04-2010

123 İtibar

7 adet Kılavuz yazıldı

Takım

Cal Poly, Team 26-34, Regan Spring 2010 Cal Poly, Team 26-34, Regan Spring 2010 üyesi

CPSU-REGAN-S10S26G34

4 Üyeler

13 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 2

Her zaman: 1,891