Ana içeriğe geç

Sony Ericsson s710a Main Interface Buttons Replacement

Neye ihtiyacın var

  1. Sony Ericsson s710a Main Interface Buttons Replacement, Battery: adım 1, 1 resimden 1.
    • Remove the back cover by sliding it off.

  2. Sony Ericsson s710a Main Interface Buttons Replacement: adım 2, 1 resimden 1.
    • Pull the battery out using your finger.

  3. Sony Ericsson s710a Main Interface Buttons Replacement: adım 3, 1 resimden 1.
    • The battery can now be replaced.

    • The battery is a 780 mAh rechargeable Lithium Ion battery.

  4. Sony Ericsson s710a Main Interface Buttons Replacement, LCD Screen: adım 4, 1 resimden 1.
    • Remove the four 6 mm screws from beneath the battery using a Phillips #00 screwdriver.

  5. Sony Ericsson s710a Main Interface Buttons Replacement: adım 5, 1 resimden 1.
    • Remove the microphone cover using the iFixit opening tool.

  6. Sony Ericsson s710a Main Interface Buttons Replacement: adım 6, 1 resimden 1.
    • Remove the two 6 mm screws from the front of the phone beneath the microphone cover using a Phillips #00 screwdriver.

  7. Sony Ericsson s710a Main Interface Buttons Replacement: adım 7, 1 resimden 1.
    • Remove the black plastic piece on the side.

    • This will allow for easier access while prying the motherboard.

  8. Sony Ericsson s710a Main Interface Buttons Replacement: adım 8, 1 resimden 1.
    • Use the iFixit opening tool to loosen the motherboard from the phone.

  9. Sony Ericsson s710a Main Interface Buttons Replacement: adım 9, 1 resimden 1.
    • Lift the motherboard out with your fingers.

    • Pull slowly. This will require some force.

  10. Sony Ericsson s710a Main Interface Buttons Replacement: adım 10, 1 resimden 1.
    • Remove the two cable connectors using the iFixit opening tool.

    • Mark the orientation and port of each cable before detaching them. The connectors are symmetrical, so this is essential for reassembly.

  11. Sony Ericsson s710a Main Interface Buttons Replacement: adım 11, 1 resimden 1.
    • On the rotational assembly remove the following screws:

    • Four 3 mm screws

    • Two 2.3 mm screws

    • Lift the rotational assembly off of the phone to allow access to the other half of the device.

  12. Sony Ericsson s710a Main Interface Buttons Replacement: adım 12, 1 resimden 1.
    • Detach the cable connectors on the other end of the cables using a plastic opening tool.

    • Record the orientation and location of each connector for reassembly.

  13. Sony Ericsson s710a Main Interface Buttons Replacement: adım 13, 1 resimden 1.
    • Remove the plastic cover on the back of the phone using an iFixit opening tool.

    • Remove the four 6 mm screws using a Phillips #00 screwdriver.

  14. Sony Ericsson s710a Main Interface Buttons Replacement: adım 14, 1 resimden 1.
    • Pry the screen assembly from the main case using the iFixit opening tool.

  15. Sony Ericsson s710a Main Interface Buttons Replacement: adım 15, 1 resimden 1.
    • With the face plate and LCD screen exposed, replace the existing LCD screen with a new LCD screen.

    • Be sure to test and make sure the detachable connections are arranged correctly.

  16. Sony Ericsson s710a Main Interface Buttons Replacement, Main Interface Buttons: adım 16, 1 resimden 1.
    • Remove the button and pad assembly as shown.

    • If desired, these items can now be cleaned or replaced.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Alexander

Üyelik tarihi: 10/29/11

75 İtibar

4 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 953