Giriş

Replacing the lens mount requires removing any lens that is already attached then simply removing the casing of the lens mount.

Parçalar

Hiçbir parçaya gerek yok.

  1. Hold lens and camera securely with two hands. With the hand holding the camera, push down on the lens button. Twist the lens counterclockwise and pull out to release lens.
    • Hold lens and camera securely with two hands.

    • With the hand holding the camera, push down on the lens button. Twist the lens counterclockwise and pull out to release lens.

  2. Using your screwdriver, remove the four (3.5 mm) Phillips screws on the front face of the lens mount.
    • Using your screwdriver, remove the four (3.5 mm) Phillips screws on the front face of the lens mount.

    • Make sure to keep track of these screws and not misplace them.

  3. Pro Tech Toolkit içeren veya $100tüm siparişlerde ücretsiz kargo!

    Mağazamıza Göz Atın
  4. Remove the silver plate by gently pinching with your fingers.
    • Remove the silver plate by gently pinching with your fingers.

  5. Now the black plate should be exposed. You can remove this again by gently pinching with your fingers and lifting up.
    • Now the black plate should be exposed. You can remove this again by gently pinching with your fingers and lifting up.

  6. Using the tweezers, grab the thin silver ring and lift up.
    • Using the tweezers, grab the thin silver ring and lift up.

  7. The camera mount should now be barren and look like this.
    • The camera mount should now be barren and look like this.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Emily Trujillo

Üyelik tarihi: 08-04-2014

1.081 İtibar

6 adet Kılavuz yazıldı

Takım

Cal Poly, Team 8-9, Regan Spring 2014 Cal Poly, Team 8-9, Regan Spring 2014 üyesi

CPSU-REGAN-S14S8G9

4 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 Gün: 5

Son 30 Gün: 15

Her zaman: 1,907