Ana içeriğe geç

Giriş

When removing the screen, you may want to use gloves so that no glass shards cut your hands.

  1. Use a Phillips #00 screwdriver to unscrew the two 5 mm screws located on the bottom of the back of the device.
    • Use a Phillips #00 screwdriver to unscrew the two 5 mm screws located on the bottom of the back of the device.

  2. Use a plastic opening tool to loosen the bottom portion of device.
    • Use a plastic opening tool to loosen the bottom portion of device.

  3. Use a plastic opening tool to loosen the top panel of the device.
    • Use a plastic opening tool to loosen the top panel of the device.

  4. Use a Phillips #00 screwdriver to remove the two 3 mm screws located on the portion under the top panel of the device.
    • Use a Phillips #00 screwdriver to remove the two 3 mm screws located on the portion under the top panel of the device.

  5. Remove the back plate from the device. Remove the back plate from the device. Remove the back plate from the device.
    • Remove the back plate from the device.

  6. Use a nylon spudger or tweezers to remove the plastic USB cover.
    • Use a nylon spudger or tweezers to remove the plastic USB cover.

  7. Use a Phillips #00 screwdriver to unscrew two 2 mm screws located on the top corners of the device.
    • Use a Phillips #00 screwdriver to unscrew two 2 mm screws located on the top corners of the device.

  8. Use a nylon spudger or tweezers to remove the plastic protective plate at the top of device.
    • Use a nylon spudger or tweezers to remove the plastic protective plate at the top of device.

  9. Remove the plastic protective frame located over the motherboard with tweezers and a spudger. Remove the plastic protective frame located over the motherboard with tweezers and a spudger.
    • Remove the plastic protective frame located over the motherboard with tweezers and a spudger.

  10. Remove screen connection from motherboard using tweezers and spudger.
    • Remove screen connection from motherboard using tweezers and spudger.

  11. Use a Phillips #00 screwdriver to remove two 3 mm screws at the bottom sides and two 1 mm screws at top sides of the device.
    • Use a Phillips #00 screwdriver to remove two 3 mm screws at the bottom sides and two 1 mm screws at top sides of the device.

  12. Use a Phillips #00 screwdriver to unscrew two 2 mm screws, and remove the motherboard from the device with tweezers and a plastic opening tool. Use a Phillips #00 screwdriver to unscrew two 2 mm screws, and remove the motherboard from the device with tweezers and a plastic opening tool.
    • Use a Phillips #00 screwdriver to unscrew two 2 mm screws, and remove the motherboard from the device with tweezers and a plastic opening tool.

  13. Disconnect the metal shielding plate from the front panel with tweezers or a plastic opening tool. Disconnect the metal shielding plate from the front panel with tweezers or a plastic opening tool.
    • Disconnect the metal shielding plate from the front panel with tweezers or a plastic opening tool.

  14. Use a plastic opening tool to remove the screen from metal back plate. Use a plastic opening tool to remove the screen from metal back plate.
    • Use a plastic opening tool to remove the screen from metal back plate.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Matthew Hintz

Üyelik tarihi: 16-01-2015

327 İtibar

3 adet Kılavuz yazıldı

Takım

USF Tampa, Team 17-6, Watkins Winter 2015 USF Tampa, Team 17-6, Watkins Winter 2015 üyesi

USFT-WATKINS-W15S17G6

4 Üyeler

5 adet Kılavuz yazıldı

Bir Yorum

very helpful!!! thx

Stefan Taubert - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 Gün: 1

Son 30 Gün: 3

Her zaman: 614