Eşyalarını Tamir Et Topluluk Mağaza

Sony PS-LX300USB Dust Cover Replacement

Giriş

The dust cover is one of the key components of a PS-LX300USB Turntable. The dustcover keeps all of the fragile components safe from dust and other potential hazards. The repair is relatively easy and can be important in maintaining your turn table.

Neye ihtiyacın var

  1. Sony PS-LX300USB Dust Cover Replacement, Dust Cover: adım 1, 1 resimden 1.

    • Turn the turntable around so that the back side is visible.

    Düzenle

  2. Sony PS-LX300USB Dust Cover Replacement: adım 2, 2 resimden 1. Sony PS-LX300USB Dust Cover Replacement: adım 2, 2 resimden 2.

    • Begin by releasing the left latch. Apply downward pressure to the square, black button using a flathead screw driver.

    • Once the latch is released, lift upward.

    • Use your left hand to hold the left side of the dust cover above the latch. This ensures the latch does not reconnect.

    Düzenle

  4. Sony PS-LX300USB Dust Cover Replacement: adım 3, 1 resimden 1.

    • Use a flat head screw driver to apply pressure to the black square button on the right side.

    Düzenle

  5. Sony PS-LX300USB Dust Cover Replacement: adım 4, 2 resimden 1. Sony PS-LX300USB Dust Cover Replacement: adım 4, 2 resimden 2.

    • Once both the right and left buttons are released, pull the dust cover upwards.

    • The dust cover is now disconnected and ready for replacement.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

3 tane daha katılımcı ile

Sean

Üyelik tarihi: 09/27/17

109 İtibar

1 Kılavuz yazıldı

Rozetler: 2

Ekip

Cal Poly, Team S8-G3, Banghart Fall 2017 Cal Poly, Team S8-G3, Banghart Fall 2017 üyesi

CPSU-BANGHART-F17S8G3

5 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 5

Son 30 gün: 20

Her zaman: 2,300