Sony Reader Touch Edition PRS-600 Back Cover Replacement

Neye ihtiyacın var

Using the Phillips head screwdriver PH000, remove the two 1.4 mm screws that are located on the backside of the device.

Slide the back cover off by pushing it to the left, away from the side that held the screws.
Remove the cover.

This is what the device should look like once the back cover panel has been removed.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Üyelik tarihi: 10/13/14

857 İtibar

7 adet Kılavuz yazıldı

CLEM-BENSON-F14S1G4

4 Üyeler

22 adet Kılavuz yazıldı