Ana içeriğe geç

Sony SRS-X3 Battery Charging Port Replacement

Neye ihtiyacın var

  1. Sony SRS-X3 Battery Charging Port Replacement, Battery Charging Port: adım 1, 1 resimden 1.
    • Remove the 6 10mm Philips head screws shown, using a PH1 screwdriver

  2. Sony SRS-X3 Battery Charging Port Replacement: adım 2, 1 resimden 1.
    • Remove the 5 8mm Philips head screws shown. These are holding the battery and the green circuit board in.

  3. Sony SRS-X3 Battery Charging Port Replacement: adım 3, 1 resimden 1.
    • Lift the battery pack and circuit board out of the housing and locate the wires and ribbon connector shown in the figure.

  4. Sony SRS-X3 Battery Charging Port Replacement: adım 4, 2 resimden 1. Sony SRS-X3 Battery Charging Port Replacement: adım 4, 2 resimden 2.
    • Remove the ribbon connector and the connector from the battery pack (Note: These connectors are not easy to remove. Force may be necessary but the connectors are durable)

    • After the connections are remove you are free to replace the circuit board.

Sonuç

To reassemble your device, follow these instructions in reverse order.

5 farklı kişi bu kılavuzu tamamladı.

11 Yorum

Bradley, this is a SONY 40BKB537U-CNF2G board….where can I get one? The mini charge port is bad on mine and v difficult to replace.

Thanks

michael ruse - Yanıt

Where can I buy the whole circuit board to replace the Charging port

Sony Mini speaker SRS - X3

40BKB537U - CNF2G

charging port

Morgan -

Where can I buy circuit board To replace charging port Sony Mini speaker SRS - X3

40BKB537U-CNF2G

Morgan -

Hi Michael, did you find a replacement board? I need to replace mine as well.

Julie Miller -

I have all the part of this speaker. Email me to negotiate! Kennyportillo99@gmail.com

kennycontreras44 -

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 3

Son 30 gün: 32

Her zaman: 6,634