Eşyalarını Tamir Et Topluluk Mağaza

Sony SRS-X55 Input Board Replacement

Giriş

This guide is a walk through for how to remove and replace the input board for the Sony SRS-X55 speaker.

Neye ihtiyacın var

  1. Sony SRS-X55 Input Board Replacement, Input Board: adım 1, 1 resimden 1.

    • Locate the six 9 mm screws on the bottom of the SRS-X55 and remove them using a Phillips head #2 screwdriver.

    Düzenle

  2. Sony SRS-X55 Input Board Replacement: adım 2, 2 resimden 1. Sony SRS-X55 Input Board Replacement: adım 2, 2 resimden 2.

    • Insert a plastic spudger at the seam of the bottom panel and remove it from the rest of the speaker.

    Düzenle

  3. Sony SRS-X55 Input Board Replacement: adım 3, 3 resimden 1. Sony SRS-X55 Input Board Replacement: adım 3, 3 resimden 2. Sony SRS-X55 Input Board Replacement: adım 3, 3 resimden 3.
    Bu adımda kullanılan alet:
    Tweezers
    $4.99
    Satın Al

    • Locate the battery plug and remove it using a pair of tweezers.

    Düzenle

  4. Sony SRS-X55 Input Board Replacement: adım 4, 3 resimden 1. Sony SRS-X55 Input Board Replacement: adım 4, 3 resimden 2. Sony SRS-X55 Input Board Replacement: adım 4, 3 resimden 3.

    • Locate the two 3.5 mm screws on the bottom of the I/O board and remove them using a Phillips head #2 screwdriver.

    Düzenle

  5. Sony SRS-X55 Input Board Replacement: adım 5, 1 resimden 1.

    • Use a plastic spudger to remove the I/O board from the speaker body.

    Düzenle

  7. Sony SRS-X55 Input Board Replacement: adım 6, 2 resimden 1. Sony SRS-X55 Input Board Replacement: adım 6, 2 resimden 2.

    • Insert a plastic spudger into the seam of the metal speaker cover and pry it downward until it releases from the speaker body.

    Düzenle

  8. Sony SRS-X55 Input Board Replacement: adım 7, 2 resimden 1. Sony SRS-X55 Input Board Replacement: adım 7, 2 resimden 2.

    • Locate the eight 8.9 mm screws on the face of the speaker assembly and remove them using a Phillips head #2 screwdriver.

    Düzenle

  9. Sony SRS-X55 Input Board Replacement: adım 8, 2 resimden 1. Sony SRS-X55 Input Board Replacement: adım 8, 2 resimden 2.

    • Insert a plastic spudger underneath one of the tabs located on the front of the speaker assembly and gently raise the speaker assembly above the rest of the speaker.

    • Continue to the next step before attempting to lift the speaker assembly from the rest of the speaker entirely to avoid damaging internal wires.

    Düzenle

  10. Sony SRS-X55 Input Board Replacement: adım 9, 3 resimden 1. Sony SRS-X55 Input Board Replacement: adım 9, 3 resimden 2. Sony SRS-X55 Input Board Replacement: adım 9, 3 resimden 3.

    • Locate the two wire connections as shown underneath of the speaker assembly and unplug them using a pair of tweezers.

    Düzenle

  11. Sony SRS-X55 Input Board Replacement: adım 10, 1 resimden 1.

    • Locate the wire connecting the motherboard and the input board under the top panel of the speaker and remove it using a pair of tweezers.

    Düzenle

  12. Sony SRS-X55 Input Board Replacement: adım 11, 3 resimden 1. Sony SRS-X55 Input Board Replacement: adım 11, 3 resimden 2. Sony SRS-X55 Input Board Replacement: adım 11, 3 resimden 3.

    • Insert a plastic spudger into the seam at the edge of the top panel and gently pry it away from the rest of the speaker.

    • The spudger can be inserted laterally into the opening created by the spudger and slid along the top as shown to remove the panel in a single motion.

    Düzenle

  13. Sony SRS-X55 Input Board Replacement: adım 12, 1 resimden 1.

    • Locate the three 4.5 mm screws on top of the speaker input board and remove them using a Phillips head #2 screwdriver.

    Düzenle

  14. Sony SRS-X55 Input Board Replacement: adım 13, 3 resimden 1. Sony SRS-X55 Input Board Replacement: adım 13, 3 resimden 2. Sony SRS-X55 Input Board Replacement: adım 13, 3 resimden 3.

    • Insert a plastic spudger underneath the edge of the input board and gently pry it away from the rest of the speaker.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

5 tane daha katılımcı ile

Chris Sparzo

Üyelik tarihi: 01/26/17

351 İtibar

2 adet Kılavuz yazıldı

Rozetler: 7

+4 tane daha rozet

Ekip

IUPUI, Team 2-3, Baechle Spring 2017 IUPUI, Team 2-3, Baechle Spring 2017 üyesi

IUPUI-BAECHLE-S17S2G3

3 Üyeler

3 adet Kılavuz yazıldı

2 Yorum

Where I can find a new input board for my srs-x55??

luc belair - Yanıt

I want to buy the sony input board.. can u pls help me on this

prafulpu - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 3

Son 30 gün: 15

Her zaman: 937