Eşyalarını Tamir Et Topluluk Mağaza

Sony SRS-X55 Speaker Reverberator Replacement

Giriş

This Sony SRS-X55 has two speaker reverberators. This guide will walk you through the removal and replacement of them.

Neye ihtiyacın var

  1. Sony SRS-X55 Speaker Reverberator Replacement, Speaker Reverberator: adım 1, 1 resimden 1.

    • Locate the six 9 mm screws on the bottom of the speaker and remove them using Phillips head #2.

    Düzenle

  2. Sony SRS-X55 Speaker Reverberator Replacement: adım 2, 2 resimden 1. Sony SRS-X55 Speaker Reverberator Replacement: adım 2, 2 resimden 2.

    • Insert a plastic spudger into the seam on the bottom panel and lift it away from the rest of the speaker.

    Düzenle

  3. Sony SRS-X55 Speaker Reverberator Replacement: adım 3, 3 resimden 1. Sony SRS-X55 Speaker Reverberator Replacement: adım 3, 3 resimden 2. Sony SRS-X55 Speaker Reverberator Replacement: adım 3, 3 resimden 3.
    Bu adımda kullanılan alet:
    Tweezers
    $4.99
    Satın Al

    • Locate the battery connection and unplug it using a pair of metal tweezers.

    Düzenle

  4. Sony SRS-X55 Speaker Reverberator Replacement: adım 4, 2 resimden 1. Sony SRS-X55 Speaker Reverberator Replacement: adım 4, 2 resimden 2.

    • Locate the remaining two 3.5 mm screws on the bottom of the I/O board and remove them using a Phillips head #2 screwdriver.

    Düzenle

  6. Sony SRS-X55 Speaker Reverberator Replacement: adım 5, 1 resimden 1.

    • Remove the I/O board from the rest of the speaker. A plastic spudger can aid in this process if it is inserted into the edge as shown and gently pried.

    Düzenle

  7. Sony SRS-X55 Speaker Reverberator Replacement: adım 6, 2 resimden 1. Sony SRS-X55 Speaker Reverberator Replacement: adım 6, 2 resimden 2.

    • Insert a plastic spudger into the seam where the forward facing metal speaker cover meets the speaker body and gently pry it upward until it releases.

    Düzenle

  8. Sony SRS-X55 Speaker Reverberator Replacement: adım 7, 2 resimden 1. Sony SRS-X55 Speaker Reverberator Replacement: adım 7, 2 resimden 2.

    • Locate the eight 8.9 mm screws on the face of the speaker assembly and remove them using a Phillips head #2 screwdriver.

    Düzenle

  9. Sony SRS-X55 Speaker Reverberator Replacement: adım 8, 2 resimden 1. Sony SRS-X55 Speaker Reverberator Replacement: adım 8, 2 resimden 2.

    • Insert a plastic spudger underneath one of the tabs on the front of the speaker assembly and gently raise it.

    • Continue to the next step before attempting to lift the speaker assembly entirely away from the rest of the speaker to avoid damaging internal wire connections.

    Düzenle

  10. Sony SRS-X55 Speaker Reverberator Replacement: adım 9, 3 resimden 1. Sony SRS-X55 Speaker Reverberator Replacement: adım 9, 3 resimden 2. Sony SRS-X55 Speaker Reverberator Replacement: adım 9, 3 resimden 3.

    • Locate the two wire connections as shown underneath of the speaker assembly and unplug them using a pair of tweezers.

    • Lift the speaker assembly away.

    Düzenle

  11. Sony SRS-X55 Speaker Reverberator Replacement: adım 10, 2 resimden 1. Sony SRS-X55 Speaker Reverberator Replacement: adım 10, 2 resimden 2.

    • Locate the eight 7.5 mm screws across both of the speaker reverberators and remove them using a Phillips head #2 screwdriver.

    • Lift the speaker reverberators away and replace them.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Yazar

5 tane daha katılımcı ile

Eric Coletto

Üyelik tarihi: 01/26/17

113 İtibar

1 Kılavuz yazıldı

Rozetler: 6

+3 tane daha rozet

Ekip

IUPUI, Team 2-3, Baechle Spring 2017 IUPUI, Team 2-3, Baechle Spring 2017 üyesi

IUPUI-BAECHLE-S17S2G3

3 Üyeler

3 adet Kılavuz yazıldı

Bir Yorum

Nice Guide, but do you know the exact speaker size and/or type?

I can not find the exact speakers.

THX

Elduderino79

El Duderino - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 6

Son 30 gün: 20

Her zaman: 1,508