Eşyalarını Tamir Et Topluluk Mağaza

Sony SRS-XB43 Faceplate Replacement

Neye ihtiyacın var

  1. Sony SRS-XB43 Faceplate Replacement, Faceplate: adım 1, 2 resimden 1. Sony SRS-XB43 Faceplate Replacement, Faceplate: adım 1, 2 resimden 2.

    • Insert the metal spudger into the mesh's seam/opening located at the bottom of the speaker.

    • Begin applying pressure, prying along the run of the seam until the mesh cover begins to come loose.

    • Fully open the hinged mesh cover and pry it off the unit.

    Düzenle

  2. Sony SRS-XB43 Faceplate Replacement: adım 2, 1 resimden 1.

    • Turn the speaker so the back is facing you.

    • Remove the factory tamper seal below the speaker volume toggle to reveal a single screw.

    • Remove the single screw using a T8 Torx.

    Düzenle

  4. Sony SRS-XB43 Faceplate Replacement: adım 3, 1 resimden 1.

    • Remove all ten screws using a Phillips #1 screwdriver.

    Düzenle

  5. Sony SRS-XB43 Faceplate Replacement: adım 4, 2 resimden 1. Sony SRS-XB43 Faceplate Replacement: adım 4, 2 resimden 2.

    • Slowly lift the speaker face off of the housing unit.

    • Unplug the six wires connecting the faceplate to the motherboard.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

Kristen Gismondi

Üyelik tarihi: 11/12/14

82.716 İtibar

202 adet Kılavuz yazıldı

Rozetler: 46

+43 tane daha rozet

Ekip

iFixit iFixit üyesi

Staff

136 Üyeler

17.430 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 3

Son 30 gün: 8

Her zaman: 137