Ana içeriğe geç

Giriş

In this guide we will be taking the Sony Smart Watch SW2 watch out of its housing to remove its screen in order to reach the interior components. This process will only require a small tool with a flat edge.

Parçalar

Hiçbir parça belirtilmedi.

  1. Detach the smart watch from the band by pushing on the back of the watch housing.
    • Detach the smart watch from the band by pushing on the back of the watch housing.

    • The power button may fall out once the smart watch is detached.

    • Set aside the power button and watch band as they are no longer needed for further disassembly.

  2. Use a plastic opening tool to carefully pry the LCD screen from the watch housing.
    • Use a plastic opening tool to carefully pry the LCD screen from the watch housing.

  3. Use a plastic opening tool or spudger to lift the screen assembly press-fit connector free.
    • Use a plastic opening tool or spudger to lift the screen assembly press-fit connector free.

  4. Set aside the detached LCD screen to access the battery.
    • Set aside the detached LCD screen to access the battery.

Sonuç

To reassemble your device, follow these steps in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Vincent Shiue

Üyelik tarihi: 22-01-2018

256 İtibar

2 adet Kılavuz yazıldı

Takım

IUPUI, Team S1-G5, Freund Spring 2018 IUPUI, Team S1-G5, Freund Spring 2018 üyesi

IUPUI-FREUND-S18S1G5

3 Üyeler

2 adet Kılavuz yazıldı

Bir Yorum

whwre can I get the LCD screen for SW2?

faizal ahamed - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 6

Son 30 gün: 17

Her zaman: 2,179