Ana içeriğe geç

Giriş

This will guide you in replacing the Media Board of a Sony Vaio VPCF 132FX

Aletler

Hiçbir alet belirtilmedi.

Parçalar

Hiçbir parça belirtilmedi.

  1. Remove all wires then flip the laptop
    • Remove all wires then flip the laptop

  2. Remove the battery Remove the battery
    • Remove the battery

  3. iPhone Pil Tamir Setleri

    Only $29.99

    Buy Now

    iPhone Pil Tamir Setleri

    Only $29.99

    Buy Now
  4. Remove the screws and flip it back.
    • Remove the screws and flip it back.

  5. Lift the screen and slide your nail or any flat plastic to the side of the cover to unclip it. Slide from the sides towards the center. Slide from the sides towards the center.
    • Lift the screen and slide your nail or any flat plastic to the side of the cover to unclip it.

    • Slide from the sides towards the center.

  6. Gently remove the wire of the Power Button.
    • Gently remove the wire of the Power Button.

  7. Unlock the Lock. Unscrew the 3 Flat screws and remove the Media Board. You may skip this step if replacing the Power Button.
    • Unlock the Lock.

    • Unscrew the 3 Flat screws and remove the Media Board.

    • You may skip this step if replacing the Power Button.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

trickster

Üyelik tarihi: 23-12-2013

1.941 İtibar

11 adet Kılavuz yazıldı

Bir Yorum

What are the functions of the media board? My vaio vgn-fw170j won't power up (no LEDS on the power switch, or anywhere else, no fan, nothing). Verified that MoBo has 19.5 VDC on the board. Replaced MoBo and CPU, still no response. Since power button plugs into Media Board, figured it might be failed - any idea if this could be the cause?

course2kid - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 4

Her zaman: 1,134