Giriş

If the LCD Display Screen is black, cracked, or has colored lines running through it when the computer is on, the screen is broken. Follow these instructions on how to install a screen

  1. Place the computer on a flat surface with the top facing up.
    • Place the computer on a flat surface with the top facing up.

    • Open the screen.

    Yorum Ekle

  2. Locate the rubber screw caps at the two bottom corners of the screen.
    • Locate the rubber screw caps at the two bottom corners of the screen.

    • Use your finger to remove the rubber screw caps.

    Yorum Ekle

  3. Free shipping on orders over $20
    Use code BLUEANDBLACK at checkout
    Free shipping on orders over $20
    Use code BLUEANDBLACK
    • Locate the two screws, one on each bottom corner.

    • Unscrew the screws with a Phillips head size #0 screwdriver.

    • Keep track of the screws. They are small and easy to misplace.

    Yorum Ekle

    • Use a plastic opening tool to gently lift the plastic casing that borders the screen.

    • Pop off the casing by working the tool around the outside of it.

    • Wiggling the tool may be required. The casing could be fitted snugly.

    Yorum Ekle

    • Carefully flip down the screen so it rests on the keyboard.

    • Locate the wire connector on the back of the screen and use a plastic opening tool to gently loosen the wire connection.

    Yorum Ekle

    • Remove the screen.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Andrew Ricker

Üyelik tarihi: 04-04-2012

71 İtibar

1 Kılavuz yazıldı

Takım

Cal Poly, Team 5-3, Forte Spring 2012 Cal Poly, Team 5-3, Forte Spring 2012 üyesi

CPSU-FORTE-S12S5G3

5 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 13

Her zaman: 2,955