Ana içeriğe geç

Giriş

This guide will show a simple way to replace the hard drive on this device.

In this guide, it is incredibly important to use the anti-static wrist band as it will protect the hard drive from receiving any static.

  1. Remove two 9mm Phillips #1 screws.
    • Remove two 9mm Phillips #1 screws.

  2. Remove the panel. Gently remove the hard drive. Remove screws securing caddy to hard drive.
    • Remove the panel.

    • Gently remove the hard drive.

    • Remove screws securing caddy to hard drive.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Haylie Hotte

Üyelik tarihi: 20-03-2019

566 İtibar

5 adet Kılavuz yazıldı

Takım

UMass Dartmouth, Team S6-G6, Peak Spring 2019 UMass Dartmouth, Team S6-G6, Peak Spring 2019 üyesi

UMASSD-PEAK-S19S6G6

3 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 5

Son 30 gün: 31

Her zaman: 875