Giriş

The PCG F360 comes with a floppy drive in an expansion bay. This can be replaced or swapped out for a battery or for a weight saver.

Aletler

Hiçbir alete gerek yok.

Parçalar

Hiçbir parçaya gerek yok.

  1. Position the laptop screen-side down as shown.
    • Position the laptop screen-side down as shown.

    • In this position the battery housing will be located on the right hand side.

    Yorum Ekle

  2. Lift the panel up and then out to gain access to the battery.
    • Lift the panel up and then out to gain access to the battery.

    Yorum Ekle

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Use the indentations to pull the old battery out.

    Yorum Ekle

    • The battery is now removed and it is safe to move on to uninstalling other components.

    Yorum Ekle

    • With one hand slide and hold the tab shown.

    • With your other hand, pull the floppy drive out of the floppy drive bay.

    • To replace the floppy drive, simply slide the drive into the slot until it clicks.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

ahintz

Üyelik tarihi: 21-04-2010

19 İtibar

8 adet Kılavuz yazıldı

Takım

Cal Poly, Team 16-3, Maness Spring 2010 Cal Poly, Team 16-3, Maness Spring 2010 üyesi

CPSU-MANESS-S10S16G3

3 Üyeler

8 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 1

Her zaman: 2,655