Ana içeriğe geç
  1. Remove cover for the extended battery connector. Use your finger nail or a plastic opening tool to remove it. Remove the two rubber feet at the back of the computer, these can be removed in the same way.
    • Remove cover for the extended battery connector. Use your finger nail or a plastic opening tool to remove it.

    • Remove the two rubber feet at the back of the computer, these can be removed in the same way.

  2. MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now

    MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now
  3. Remove the four 5.6mm  Philips #00 screws located at the top of the computer. Remove the eight 3.6mm Philips #00 screws on the base of the computer.
    • Remove the four 5.6mm Philips #00 screws located at the top of the computer.

    • Remove the eight 3.6mm Philips #00 screws on the base of the computer.

  4. Using a plastic opening tool, pry the plastic casing away from the base of the computer, the remaining clips around the edges can be released using your hands. Leave the side with the USB and audio port until last, then slide the case out and off, so the audio port doesn't get caught.
    • Using a plastic opening tool, pry the plastic casing away from the base of the computer, the remaining clips around the edges can be released using your hands.

    • Leave the side with the USB and audio port until last, then slide the case out and off, so the audio port doesn't get caught.

Sonuç

To reassemble your device, follow these instructions in reverse order.

6 farklı kişi bu kılavuzu tamamladı.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 6

Son 7 Gün: 20

Son 30 Gün: 91

Her zaman: 4,552