Ana içeriğe geç

Giriş

The motherboard is the component that controls the logic and computation of the laptop. This guide shows the steps to remove the motherboard for repair or replacement.

Parçalar

Hiçbir parça belirtilmedi.

  1. Turn the laptop over so its underside is facing upwards and visible.
    • Turn the laptop over so its underside is facing upwards and visible.

  2. Standing so that the barcode and warning labels are upright and legible,  push the left tab up and away from yourself.
    • Standing so that the barcode and warning labels are upright and legible, push the left tab up and away from yourself.

  3. Standing so that the barcode and warning labels are upright and legible,  push the right tab up and away from yourself.
    • Standing so that the barcode and warning labels are upright and legible, push the right tab up and away from yourself.

  4. Locate the small gap where the battery and the laptop shell meet. Lift from the gap and rotate the battery up and away from yourself.
    • Locate the small gap where the battery and the laptop shell meet. Lift from the gap and rotate the battery up and away from yourself.

  5. Pull battery away from laptop.
    • Pull battery away from laptop.

  6. Flip laptop over so the bottom is facing upwards.
    • Flip laptop over so the bottom is facing upwards.

  7. Remove 2 bottom screws in the top right on the HDD cover, with a size P000 screwdriver.
    • Remove 2 bottom screws in the top right on the HDD cover, with a size P000 screwdriver.

  8. Pop open the cover to the HDD. Pop open the cover to the HDD.
    • Pop open the cover to the HDD.

  9. Remove the  screws on the HDD with a Phillips #000 screwdriver.
    • Remove the screws on the HDD with a Phillips #000 screwdriver.

  10. Pull plastic tab away from the laptop. Lift HDD away from laptop.
    • Pull plastic tab away from the laptop.

    • Lift HDD away from laptop.

  11. Flip the laptop over on its backside.
    • Flip the laptop over on its backside.

  12. Remove the screws holding the motherboard in place.
    • Remove the screws holding the motherboard in place.

  13. Pop the motherboard away from the frame. Pop the motherboard away from the frame.
    • Pop the motherboard away from the frame.

  14. Remove the ribbon cable from the motherboard.
    • Remove the ribbon cable from the motherboard.

  15. Remove motherboard from the laptop. Remove motherboard from the laptop.
    • Remove motherboard from the laptop.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Alex Theg

Üyelik tarihi: 15-10-2018

683 İtibar

4 adet Kılavuz yazıldı

Takım

UMass Dartmouth, Team S9-G9, Valliere Fall 2018 UMass Dartmouth, Team S9-G9, Valliere Fall 2018 üyesi

UMASSD-VALLIERE-F18S9G9

4 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 4

Son 30 gün: 25

Her zaman: 937