Ana içeriğe geç

Giriş

In this guide, you will remove the 5 screws holding the device together. In addition, this guide details the various cables connecting the screen to the motherboard.

Parçalar

Hiçbir parça belirtilmedi.

  1. Begin by popping open the HDMI/USB port cover on the left edge.
    • Begin by popping open the HDMI/USB port cover on the left edge.

    • Remove the three #000 headed, 3 mm long screws located underneath the port cover.

  2. Apple Watch Kitleri

    Screen and battery repairs just got easier.

    Hemen Alışveriş Yapın

    Apple Watch Kitleri

    Screen and battery repairs just got easier.

    Hemen Alışveriş Yapın
  3. There are two #000 headed, 3 mm long screws under a similar cover covering the Micro SD slot on the top side of the device.
    • There are two #000 headed, 3 mm long screws under a similar cover covering the Micro SD slot on the top side of the device.

    • Remove the two screws beneath the Micro SD card slot cover.

  4. Attach the suction cup to the top right area of the screen. Pull to remove the screen from the rest of the device.
    • Attach the suction cup to the top right area of the screen.

    • Pull to remove the screen from the rest of the device.

    • Watch out for the front camera cable connected to the top middle of the device. The display ribbon cable should just slide out.

Sonuç

To reassemble your device, follow these instructions in reverse order.

3 farklı kişi bu kılavuzu tamamladı.

Alexander Bridges

Üyelik tarihi: 16-09-2015

1.118 İtibar

7 adet Kılavuz yazıldı

Takım

IUPUI, Team 1-2, Harley Fall 2015 IUPUI, Team 1-2, Harley Fall 2015 üyesi

IUPUI-HARLEY-F15S1G2

4 Üyeler

20 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 Gün: 3

Son 30 Gün: 20

Her zaman: 1,700