Ana içeriğe geç
  1. Before you start, turn off your player.
    • Before you start, turn off your player.

  2. Unscrew the two Phillips screws on the back of the drive. Unscrew the two Phillips screws on the back of the drive.
    • Unscrew the two Phillips screws on the back of the drive.

  3. Use a plastic opening tool to pry on the edges of the drive. Once the cover is detached from the front panel of the player, be careful not to lose the volume key.
    • Use a plastic opening tool to pry on the edges of the drive.

    • Once the cover is detached from the front panel of the player, be careful not to lose the volume key.

    • Also be careful not to lose the small room below the Hold switch (see image 2)

  4. Remove the single Phillips screw that holds the front panel and the interior components of the drive.
    • Remove the single Phillips screw that holds the front panel and the interior components of the drive.

  5. The interior components of the reader are held by 4 plastic clips. Be careful not to break them by removing the display assembly, battery and the motherboard. Be careful not to break them by removing the display assembly, battery and the motherboard.
    • The interior components of the reader are held by 4 plastic clips.

    • Be careful not to break them by removing the display assembly, battery and the motherboard.

  6. Remove the 5-way navigation key.
    • Remove the 5-way navigation key.

Sonuç

To reassemble your device, follow the instructions in reverse order.

Bu çevirmenlere özel teşekkürler:

100%

Israel dünyayı onarmamıza yardım ediyor! Katkıda bulunmak ister misiniz?
Çeviriye Başlayın ›

Dina Rafanomezantsoa

Üyelik tarihi: 06-05-2016

3.927 İtibar

1 Kılavuz yazıldı

Takım

iFixit iFixit üyesi

Community

108 Üyeler

9.537 adet Kılavuz yazıldı

0 Comments

Yorum Ekle

İstatistikleri Görüntüle:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 22

Her zaman: 357