Giriş

If the LCD display of your phone is broken, in this manual we will show you, how to disassemble the phone and how to change it.


Please SUBSCRIBE to my channel ツ

Videoya Genel Bakış

  1. Switch-off the phone and remove the battery. Switch-off the phone and remove the battery. Switch-off the phone and remove the battery.
    • Switch-off the phone and remove the battery.

  2. The small bottom bezel is held by 2x locking clips. Preferably use plastic tools for disassembling. Preferably use plastic tools for disassembling.
    • The small bottom bezel is held by 2x locking clips.

    • Preferably use plastic tools for disassembling.

  3. There are 4x silver screws and 3x black screws. The rear cover is held by 5x locking clips. Two of them, at the bottom side are more hard for unlocking. You can use a screwdriver or other metal tool to unlock them.
    • There are 4x silver screws and 3x black screws.

    • The rear cover is held by 5x locking clips.

    • Two of them, at the bottom side are more hard for unlocking. You can use a screwdriver or other metal tool to unlock them.

  4. Remove the back cover. With a plastic tool disconnect one by one: LCD Display flex cable
    • Remove the back cover.

    • With a plastic tool disconnect one by one:

    • LCD Display flex cable

    • Touchscreen flex cable

    • Menu Buttons Board flex cable

    • Coaxial Wire Antenna cable

  5. Pro Tech Toolkit içeren veya $100tüm siparişlerde ücretsiz kargo!

    Mağazamıza Göz Atın
  6. Carefully remove the main board. Carefully remove the main board.
    • Carefully remove the main board.

  7. Disconnect the other side of the flex cable and remove the Home Buttons board. Unstick the camera button. Unstick the camera button.
    • Disconnect the other side of the flex cable and remove the Home Buttons board.

    • Unstick the camera button.

  8. The touch screen is stuck to the frame with double side adhesive tape. By using plastic tools gently start separating. At the bottom is glued on firmly because the bonded surface is larger.
    • The touch screen is stuck to the frame with double side adhesive tape.

    • By using plastic tools gently start separating.

    • At the bottom is glued on firmly because the bonded surface is larger.

    • Use a hot air to make separating more easy and safety.

  9. With a plastic tool, carefully separate the LCD display from the touch screen. Clear the LCD Display from the old adhesive tape. Clear the LCD Display from the old adhesive tape.
    • With a plastic tool, carefully separate the LCD display from the touch screen.

    • Clear the LCD Display from the old adhesive tape.

  10. Install the new LCD into the frame and put adhesive tape. Be careful not to cover the holes (for the speaker, menu buttons etc.). Install the Touchscreen. Install the Touchscreen.
    • Install the new LCD into the frame and put adhesive tape. Be careful not to cover the holes (for the speaker, menu buttons etc.).

    • Install the Touchscreen.

  11. To reassemble your device, follow these instructions in reverse order.
Sonuç

To reassemble your device, follow these instructions in reverse order.

ZFix

Üyelik tarihi: 09-12-2013

162.987 İtibar

304 adet Kılavuz yazıldı

Takım

Master Techs Master Techs üyesi

Community

281 Üyeler

792 adet Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 14

Her zaman: 10,792